电动餐桌机芯结构图 宴会厅15人电动桌椅尺寸

酒店定制厂家定制厂家电动餐桌用的材质很重要-佛山岚慧定制厂家电动餐桌

The materials used for customizing electric dining tables by hotel manufacturers are very important - Foshan Lanhui customizes electric dining tables by manufacturers

在家庭装修和定制厂家电动餐桌制作的过程中我们都需要使用到板材，用来做餐台、鞋柜、书柜或是其他柜体等等。  板材的选择非常关键。

In the process of home decoration and customized manufacturer's electric dining table production, we need to use boards to make dining tables, shoe cabinets, bookcases, or other cabinets, and so on. The selection of sheets is crucial.

走进板材市场，种类比比皆是，各种价位应有尽有，对于非业内人士来说，根本看不出其中的奥妙。  但是在选购的时候还是会步入一些误区从而影响到后期的使用，下面带大家了解下板材的选购误区，越早知道这些越好哦！

 

 

 

Entering the sheet metal market, there are various types and prices available, but for non industry professionals, the mystery cannot be seen at all. However, there may still be some misunderstandings during the selection process, which can affect later use. Below, we will take you to understand the misunderstandings in the selection of boards. The earlier you know about these, the better!

误区一：板材越重品质越好  挑选板材的时候，很多销售员都会介绍，板材越重越厚实，品质越好，其实这种说法是不正确的，板材越重，强度是会相对较高，握钉力也会更好。  但是没有必要过分追求板材的重量和厚度，并以此为标准来衡量板材的品质好坏，只要是符合国家的标准就好。

 

 

Myth 1: When selecting boards, the heavier the board, the better the quality. Many salespeople will introduce that the heavier the board, the thicker the quality. However, this statement is incorrect. The heavier the board, the higher the strength, and the better the nail grip. But there is no need to overly pursue the weight and thickness of the board, and use it as a standard to measure the quality of the board, as long as it meets national standards.

内行人买板材一看烘干度，二看拼接，干燥度好的板材反而相对很轻，还不会出现裂纹，很平整。而且很多板材虽然看起来很厚，但其实中间是多层板材结合到一起的，里面可能还有空心的。  此外，太重的板材会对五金件造成负担，影响定制厂家电动餐桌的使用寿命。

Insiders look at the drying degree and splicing when buying boards. However, boards with good drying degree are relatively light and will not crack, making them very flat. Moreover, although many boards may appear thick, they are actually composed of multiple layers of boards combined together, and there may be hollow spaces inside. In addition, heavy boards can burden hardware and affect the lifespan of customized electric dining tables from manufacturers.

误区二：定制厂家电动餐桌定制板材防潮和防水是一个性质  在很多人的观念中，防潮和防水是可以划上等号的。实际上，这种观念也是不正确的。  防潮剂是在板材基材中混入的，它对于板材本身的防水性能并没有任何影响。

 

 

 

Myth 2: Customized electric dining tables from manufacturers have the same nature of moisture and waterproofing as customized boards. In many people's minds, moisture and waterproofing can be equated. In fact, this concept is also incorrect. The moisture-proof agent is mixed into the substrate of the board, and it has no effect on the waterproof performance of the board itself.

实践证明，有防潮剂的板和没有防潮剂的板浸泡在水中，膨胀率是相同的，所谓防潮只是对空气中的潮气有作用。  切不可盲目迷信防潮板性能，加入过多反而会影响板材的强度。

Practice has shown that boards with and without moisture-proof agents have the same expansion rate when soaked in water. The so-called moisture-proof only has an effect on moisture in the air. Do not blindly believe in the performance of moisture-proof boards. Adding too much can actually affect the strength of the board.

误区三：贪小便宜选择低廉板材  板材的生产厂家不同，生产成本、产品质量以及所用的材质不尽相同，酒店定制厂家电动餐桌价格肯定也会不同，一些黑心厂家为了降低价格，使用枯木、朽木等劣质材料，甚至在中间填充锯末等。

 

 

 

Mistake 3: Different manufacturers choose low-cost board and board products due to their greed for small and cheap prices, resulting in different production costs, product quality, and materials used. Customized electric dining tables for hotel manufacturers will definitely have different prices. Some unscrupulous manufacturers use inferior materials such as dead wood and rotten wood to lower prices, and even fill the middle with sawdust.

这些劣质板材不但做工粗糙，生产过程中还可能会使用大量的劣质脲醛胶，更是没有清洁环节，所以就算外观看上去相似，内在质量却是天壤之别。

These inferior boards not only have rough workmanship, but also may use a large amount of inferior urea formaldehyde adhesive during the production process, and there is no cleaning process. Therefore, even if the appearance looks similar, the internal quality is vastly different.

产品的质量始终是与我们付出的价格成正比的，如果只想购买到价格便宜的板材而不考虑其他的因素，那么只会导致后期使用出现质量问题。

The quality of the product is always proportional to the price we pay. If we only want to purchase cheap boards without considering other factors, it will only lead to quality problems in later use.